SmileDesign
Design a patient's new smile on their own photo — with AI, or from the lab's wax-up — see it in HD and in 3D on their scan, export it for the lab and share the before and after with them.
SmileDesign draws new teeth on the patient's smile photo. You shape them in the editor, place them on the patient's scan, Smileline paints them photoreal, and you present and share the before and after with the patient — always marked as a simulation.
SmileDesign is for practices in the United Kingdom (GB), the United States (US), Italy (IT) and Ireland (IE). Elsewhere the patient's Files shows no designs and no New smile design tile, the studio does not open and the API refuses it. Scans from a connected scanner are offered in GB, the US and Ireland only, and sharing reaches the patient app in GB, the US and Ireland; in Italy the patient sees the result in the web portal.
Anyone who can see the patient's documents can look at their designs, in Files and read-only in the studio. Anyone who can upload the patient's documents can design: owners, managers, the front desk, dentists, hygienists, nurses and agency staff. The right to file documents, which the same roles have, is needed to save a retouched photo or a waiting video (or HD) to the patient's Files from your browser, to share a result, and to lock or archive a design.
Whenever SmileDesign doesn't offer something — your role, a locked or archived design, a paid action not set up yet — the control stays visible and says why when you point at it or move to it with the keyboard.
Which AI does what, and what it costs
- In your browser, nothing sent anywhere: the face model (MediaPipe Face Landmarker) finds the face, the lips, the midline, the head's tilt and the photo's scale from the irises, and suggests the smile photo. The teeth, the 3D crowns, their placing on the scan, colour changes on an HD result and the exports are worked out in the browser too, from Smileline's own tooth shapes. Where SmileDesign offers it, a tooth model (SAM 2.1) outlines the patient's own teeth in the browser as well (see The patient's own teeth).
- OpenAI (image editing,
gpt-image-2.5-sunburst) makes the retouched photo and the HD render. It receives the photo and the design drawn on it. - fal.ai (Alibaba's Wan 3.0, image to video) makes the video's two clips: the before from the photo, and the after from the HD, which it starts and ends on.
Both process the pictures for Smileline. Nothing is shown to the patient until you share it.
Results are saved to the patient's Files by themselves, marked as a simulation: an HD as soon as it is ready, and a video once someone who files documents opens the design in Chrome, Edge or Safari, because that browser writes the Simulation label into the video's frames.
Render HD and the video are billed by use, on the SmileDesign AI line of your Smileline bill (Settings › Billing shows this period's renders, videos and charge). An HD render usually comes to about £0.11 and a video to about £2.16 (VAT included), or $0.12 and $2.40 (plus any applicable tax). The usual charge shows before you ask: on Render HD, on Make the video, and on Retry, which asks again and is charged like a new result. An HD is charged once, when it is saved to Files — or, if saving it couldn't finish on Smileline's side, when it is kept for the next person who files documents to save. A video's two clips are charged once each, when they are ready. The retouch, automatic repairs and failed attempts are free.
A result that can't be used says why, with Retry and Dismiss. An AI request that hasn't finished within 24 hours stops and says so.
Start a design
Open the patient's record and click Files. Click the New smile design tile beside Add files at the start of today's row — or, with a design open, + New design.
New smile design asks what to make at the top: Design with AI, or From the lab's design when a lab has made a wax-up or ortho setup for you to review on the face (see From the lab's design). Below it are the patient's photos, by day. Smileline looks at them in your browser and marks the frontal one with the teeth showing Suggested · frontal smile, already chosen for you. A ✦ marks a photo that Has a retouched copy from another design. Pictures SmileDesign made — retouched copies and HD results — are never offered: a design starts from a photo as it was taken. Upload a photo, or drop one on the dialog, to add one.
Click a photo to choose it, then Start the design. Smileline reads the smile and lays out a first design of twelve upper teeth in the studio, then retouches the photo. The patient's newest upper scan is taken by itself (one too large for the browser is passed over); change it later with ⋯ › Change the scan…. A ✦ photo opens on the compare with its retouched copy, which costs nothing more. Clicking twice, or again after a lost connection, never makes two designs.
If the photo shows no face Smileline can read, it says so: go back and choose another photo. A photo taken with the head tilted is turned so the face is upright, and its 4:5 crop is made a little smaller so no turned corner ever shows.
A design whose first save never happened — no face was found, or the tab closed while it was set up — holds nothing. Smileline clears it a day after it was started. The removal shows in the patient's Record history as done by the system, and the design's address then says it no longer exists.
What SmileDesign saves to the patient's record — the retouched photo, HD results, simulations, videos and exports — is titled in your practice's language: Italian for practices in Italy, English in the UK, the US and Ireland.
Designs
In the patient's record, each smile design is a tile among the files on its day — its latest HD saved to Files, else its photo, with its name — and clicking it opens the patient's designs on that one. ← Files at the top left goes back to the files. A design has its own address too, so a link or Back brings you to it.
- On the left, the patient's designs, the newest change first: each with its picture, its name, how it was made and who started it, and HD saved to Files, No HD yet, Lab's design, Archived or Locked. Filter by type shows only designs made with AI or only the lab's; + New design starts another.
- In the middle, the design: its photo, or once it has an HD, the before
and the after with a line to drag across them (the arrow keys move it
too). Under it:
- Edit the design opens it in the studio. If you can't change it — your role, or a locked or archived design — it reads Open the studio and the studio opens read-only;
- Present shows the result full screen (see Present);
- Video opens the before and after video (see Video);
- Share shares it with the patient (see Share with the patient);
- ⋯ is the design's menu.
- On the right, what the design holds: the teeth it designs, its HD result and when it was rendered, its video (or Make the video with its usual charge), whether the patient has it, and its own History, newest first, with Show more.
Archived designs show only under Show archived, in the Files tab's ⋯ menu, each marked Archived, with Unarchive for whoever may file documents.
Choose the original or the retouched photo
A new design asks once whether to design on the photo as it was taken (Use the original) or on a copy the AI evens the light, skin and background of (Retouch the photo, free). The AI never touches the mouth.
Once the retouched copy is ready, the original and the copy sit side by side; drag the line across the copy to compare them. Continuing means you accept any changes the AI made, so check the face and teeth.
- Use the retouched one saves the copy you are looking at to the patient's Files and designs on it. If the copy is saved but the design couldn't take it, Save the retouched one again finishes it. Saving the copy to Files needs the right to file documents; anyone who designs can choose a copy that is already there.
- Use the original designs on the photo as it was. For whoever may file documents, it also stops a retouch still working.
The design keeps your answer, and the question shows until you give it. A duplicate keeps the same answer and photo, unless the retouched copy it was drawn on is no longer in Files (it was entered in error): the duplicate then asks the question again. Smileline starts the retouch by itself only for a design you have just started from a photo; anywhere else — a duplicate, a reload — it waits for Retouch the photo, so nothing is sent to the AI service you didn't ask for.
You can switch photos later: ⋯ › Use the original photo or Use the retouched photo. If the retouched copy a design is drawn on is entered in error in Files, the design says it can't open the photo and offers Use the original. A locked or archived design keeps its ⋯ there: Unlock or Unarchive it first (whoever may file documents can), or Duplicate it, and the copy asks the photo question again.
The studio
Edit the design opens the design full screen, on a dark canvas. Along the top: ‹ All designs (back to the patient's designs, once your last change is saved — if it can't be saved, you stay, and the note says why), the design's name (click it to rename the design) and the patient's name, a lock or archive icon when it takes no edit, Undo and Redo, Present, Render HD (see Render HD), ⋯ (the studio's tools) and ? (Help).
The photo fills the rest. Over it, at the bottom:
- with no tooth open, Opacity fades the design (and the HD) to show the patient's own teeth, Warmth warms or cools the teeth, Hide the design (or Show the design) takes it off the photo and puts it back, and once an HD is shown, the replay button plays its reveal again;
- with a tooth open, the tooth bar (see Each tooth on its own);
- at the bottom right, the zoom: −, how far you are zoomed in, +, and The whole face.
At the top, a small note shows what the HD is doing (see Render HD).
Zoom and move around
| Touchpad | Mouse | |
|---|---|---|
| Zoom in and out | Pinch | Scroll wheel, toward the pointer |
| Move around | Two fingers | Drag with the middle button, or drag the photo once zoomed in |
| Frame the mouth, or back to the face | Double-click | Double-click |
A touchscreen zooms with two fingers too. Once you zoom in, each designed tooth shows its outline and the frame shows its handles.
Some mice that scroll smoothly on a Mac move the photo instead of zooming. Use + and −, or pinch on the touchpad.
Frame the mouth
Zoom toward the mouth, click inside it, double-click, or press Enter: the mouth fills the canvas, framed by its handles. Double-click again, click The whole face or press Esc to go back to the face. Q gives a close-up of the front teeth, and Q again takes it away; you can move around in it, but not zoom.
Drag the frame's handles:
- a corner widens or narrows the arch from the midline (hold Alt for one side), and down lifts the canines and the teeth behind them;
- the T at the top moves the gum line up and down and the whole design sideways;
- the bottom handle moves the incisal edges;
- a side handle widens the front six teeth, every contact kept closed;
- the points between the teeth (the papillae) and the dots on each tooth's top move the gum;
- the line along the inner lips reshapes the lips; ⋯ › Reset the lips reads them from the photo again.
A handle you let go stays chosen until you choose a tooth. With the canvas focused, [ and ] choose a handle, each point of the lip line too (the chosen point is marked), and the arrow keys move it (Shift for bigger steps; Alt keeps a corner to its own side); Esc lets it go.
Each tooth on its own
Click a tooth, or press → with the canvas focused, to open it: the tooth bar opens at the bottom, over the photo. At the whole face, a click on a tooth first frames the mouth. ‹ and › (or ← and →) go to the previous and next tooth. × or Esc closes it, and so does zooming back out to the face.
- The number names the tooth in your chart's notation. Click it and type another upper tooth's number to draw this one as that tooth: 11 typed as 13 draws a canine in 11's place. Its own number puts it back.
- Remove keeps the patient's own tooth there: its neighbours keep their places, and Render HD and the 3D exports leave it as it is. Add brings a designed tooth back. A design keeps at least one tooth.
- The shapes: Partner gives this tooth the shape of the tooth on the other side; then Natural oval, Square, Triangular and Youthful.
- Mirror copies this tooth's shape and size onto the tooth on the other side, mirrored. It is copied once: a later change to either tooth stays on that tooth, and the button reads Mirrored while the two are mirror images.
- Flip swaps the two teeth's shapes; each tooth keeps its own size and place.
- Reset puts the tooth back on the arch.
Every tooth is edited on its own: changing one never changes its partner. Mirror and Flip need both teeth designed, and say so when the partner is the patient's own tooth.
Once zoomed in, drag any tooth to move it — it opens as you press it; Shift and drag to resize it, ⌘ (Ctrl off a Mac) and drag to turn it. G shows the turn ring round it: drag the ring to tilt the tooth in the photo's plane, or a diamond to move it along its arrow. Without the pointer: Alt with the arrow keys moves it one pixel, Shift Alt with the arrows resizes it, Ctrl Alt ← → turns it and Ctrl Alt ↑ ↓ tilts it.
The portrait ring
At the face, the two arcs round it straighten the portrait: click the ring (or focus it and press Enter), then drag its knob, or use ← and → for a tenth of a degree (Shift: a degree). Esc leaves the ring. The lips, the face and the teeth outlined on the photo turn with it, and a crown on the scan stays on it.
Guides
Drag a guide line out of the canvas's top, left or bottom edge to line teeth up against; drag it back to the edge to remove it. From the keyboard, [ and ] reach the guide bands and each guide after the frame's handles; on a band, the arrow pointing away from it draws a guide; on a guide, the arrows move it and Delete removes it. U hides the guides and shows them again. They are saved with the design.
Help and tips
? (Help) holds Help centre, Contact support, Copy details for support, Controls (or press ?: the touchpad, mouse and keyboard controls) and Show tips (or press T), which describes each control as you point at it or move to it. Tips are kept in this browser. At the whole face, a note at the bottom left recalls how to zoom, move around and open a tooth.
The menu button at the top left of the canvas opens the team chat as a column beside the design.
Saving and Undo
Every change saves by itself a moment after you make it; a drag is saved when you let it go. If a save fails, a note says why, with Retry. Undo and Redo (Ctrl Z and Ctrl Shift Z, ⌘ on a Mac) step through your last changes; so do Undo and Redo in the top bar. With an HD shown, W turns the opacity off and on. The opacity is saved with the design; on a design that takes no edit it lasts your visit.
If someone saves the same design in another tab or on another computer first, nothing is overwritten. When you changed different things — their teeth and your opacity, say — the two are kept together by themselves. Otherwise Saved in another tab asks: Load their version drops your changes for theirs; Save mine over it keeps yours. If someone locks or archives it meanwhile, the editor reads it again and opens it read-only, saying why.
The patient's own teeth
Outlining the patient's own teeth is being tested and isn't offered to practices yet. Where SmileDesign offers it, it works as described here.
A new design opens at once from the photo's incisal edge. Meanwhile SmileDesign outlines each of the patient's own upper teeth on the photo, in your browser — nothing is sent anywhere — and uses the outlines three ways:
- The design fits the real teeth. When every front tooth, canine to canine, is outlined as one whole tooth inside the lips, SmileDesign moves the design onto the patient's own dental midline, at the width of their central incisors and onto their own incisal edges, and says so. It is one step: Undo takes it back. If you changed the design before the outlines were ready, it is left as you made it, and ⋯ › Fit to the teeth fits it when you ask, each tooth keeping its shape. Reset and a tooth you bring back keep to the real teeth too. If the outlines don't pass, the design stays on the photo's incisal edge.
- ⋯ › Outline the patient's own teeth draws them over the photo in a dashed line, and hides them again.
- The HD check. Once an HD is saved, SmileDesign outlines its teeth too and compares each with the design, first premolar to first premolar. If the HD made a tooth wider or narrower, moved it or changed its edge by more than half a millimetre, or lost it, a note under the HD names each tooth and by how much once you Show it, and Hide hides it for that HD in this browser. ⋯ › Download, Export and Share with the patient repeat the warning. The HD stays saved either way: change the design and Update, or mark it entered in error in Files.
The tooth model (SAM 2.1, about 105 MB) downloads the first time each browser uses it, and the browser keeps it until Smileline updates the model. A private window keeps it only until the window closes, and a browser that lets the page keep nothing downloads it each time. With WebGPU (current Chrome, Edge and Safari, for example) it outlines the teeth in about half a second; without it, in about eight seconds. The design never waits for it. If it can't load, the design stays on the photo's incisal edge and the HD shows no check.
The design's menu
In the patient's designs, ⋯ holds:
- Rename — the design's name (it starts as SmileDesign and the date);
- Duplicate — a new design with this one's current design, photos and retouch answer (asked again when its retouched copy is no longer in Files), named as a copy; its renders and videos stay with the original;
- Lock and Unlock — a locked design takes no edit, render or video until it is unlocked; exporting and Duplicate still work;
- Archive and Unarchive — put a design away without deleting it; it leaves Files and takes no edit, render or video until unarchived;
- Download — the Final photo, labelled and the Before and after, side by side, both with any colour change; “Simulation” label on downloads is ticked to begin with. The video's clips are downloaded from Files;
- Export — see Export.
In the studio, ⋯ holds the tools for the design itself, where they apply: Fit to the teeth, Outline the patient's own teeth, Reset the lips, Use the original photo or Use the retouched photo, On the scan (see Match the photo to the scan), Change the scan… and Export.
A locked or archived design opens in the studio as it is, read-only, with an icon beside its name that says why; Unlock and Unarchive are in the patient's designs, for whoever may. Read-only, the studio's ⋯ keeps Outline the patient's own teeth, On the scan once the scan is matched, and Export.
Render HD
Render HD, in the studio's top bar, shows the HD's usual charge when you point at it. Click it: Smileline saves the design, draws exactly what it saved into the photo in your browser and sends it to OpenAI, which paints the teeth photoreal. Keep editing while it works: your later changes are saved for next time, never mixed into this render.
Render HD replaces the teeth from the gum line down, or from the lip where the lip hides the gum. The gum above stays the patient's own, so on a gummy smile, move the gum line down to the patient's gum first (the T or the gum dots). A tooth you Remove stays the patient's own: it is neither cleared nor repainted, in the HD or in the 3D exports.
While the HD is made, the note at the top of the photo is a moving wave (Rendering…). Smileline then saves it to the patient's Files by itself, marked as a simulation, and the note reads Show. Show reveals the HD over the design once; after that the design opens on its HD for everyone, in every browser, and the replay button plays the reveal again. Show the design brings the design back over it.
If saving the HD couldn't finish on Smileline's side, it waits, kept: Saving to Files… while someone who files documents has the design open, or Saved to Files once someone who files patient documents opens the design. A save that failed in your browser says so, with Retry, which saves it again and never renders anew.
A new warmth on a shown HD is applied to it in your browser at once — no new render, no charge, and the same after the page is reloaded. After you change the teeth, the frame or the photo, the top bar offers Update HD with its charge, which renders the design as it is now. If the HD's picture is entered in error in Files, the design no longer has that HD, and Render HD is offered again.
When the AI's answer can't be used
One line says why — the AI service declined the picture or had a problem, its answer couldn't be read, the result was too large or gone, it didn't finish within 24 hours, or it failed three times in a row — with:
- Inspect — the AI service's answer exactly as Smileline kept it: any picture in it shown as a picture, the start of a long text, and Download the answer for all of it;
- Dismiss — set it aside;
- Retry — ask again, with its usual charge.
If Smileline couldn't tell whether the request reached the AI service, it says so: check before you try again, as it may still answer. If the pictures a job was asked with are no longer kept, Retry draws the design again and starts anew, and says so once it has; when it can't, it says why.
Match the photo to the scan
⋯ › On the scan puts the design on the patient's upper scan. The first time, with no scan yet, it asks you to Choose the upper scan from the 3D files filed on the patient — the upper scans first, and scanner archives, from which Smileline opens the upper jaw — or to Upload a 3D file. A scan too large for the browser says so. ⋯ › Change the scan… picks another later; a new scan drops the old match. Then Match the photo to the scan opens:
Double-click a point on the photo, then the same point on the scan: the incisal edges of 11 and 21 and the cusp tips of 13 and 23 to begin with; the line above names the point to place, and ‹ and › go through them. Turn the scan by dragging it. With the keyboard, focus the photo, move its cross with the arrow keys (Shift for bigger steps) and press Enter; on the scan, the arrow keys turn it and Enter places the point under its cross.
With four points on both, Smileline works out the camera that took the photo and shows how far off the points are, in pixels and millimetres.
Click Confirm the match. Smileline places each designed crown on its tooth of the scan, in true size. Where the lip hides a tooth's neck, its crown keeps the length you designed; where the photo shows the gum line below the lip, the crown's neck follows that gum line.
The crowns on the scan
Once matched, On the scan shows the scan and the crowns in 3D, first from where the photo was taken; press it again to go back to the photo. A crown Smileline couldn't place — where the scan has no tooth under its frame — is listed above the view: move its frame on the photo and click Place on the scan again, which places every crown the same way, or Remove it.
Choose a tooth, then drag the gizmo's arrows (Move) or rings (Turn) to adjust its crown; with the view focused, Shift and the arrow keys (and Page Up, Page Down) nudge it a tenth of a millimetre or a degree at a time. Every adjustment is one step for Undo. Match again redoes the match.
A tooth you then move, widen, lengthen or tilt on the photo leaves the scan, because its place there came from its old frame, until you click Place on the scan again. A new shape, turn, number or Flip keeps a crown where it is.
Present, video, export and share
Present
Present — in the patient's designs or in the studio's top bar, once the design has an HD — shows only the result, full screen: the HD after, with a small Simulation mark in a corner (Simulation · outdated once the design changes). A lab design shows the lab's design on the face (on its On the face step). × or Esc leaves it, back where you were. If the browser doesn't allow full screen, it fills the window instead.
Video
In the patient's designs, Video opens Make a before and after video: a short clip of the patient's smile as it is, and one of the HD brought to life, which starts and ends on the HD. Make the video shows its usual charge first. While the photo and its crop stay the same, a new HD makes only a new after: the before is kept and isn't charged again. Once both clips are ready, the browser of someone who files documents writes the Simulation label into their frames and saves them to the patient's Files, titled before and after video, by itself — whether or not the dialog is still open; download or share them from there. Writing the label needs Chrome, Edge or Safari; another browser says so and saves nothing.
While the video shows the design, You can make a new video after you change the design. After a change it reads Video · outdated and Make again makes a new pair. Play starts both clips together; where SmileDesign outlines the patient's teeth, a check then says whether the new teeth stay steady in the after. If your browser couldn't draw the HD in a new colour, Make the video says so: put the colour back, or open the design in another browser.
Export
Export makes the 3D for the lab, in one of seven forms: One file or One per tooth, each as STL, OBJ or PLY, or Wax-up on the scan (STL): the upper scan and the crowns as separate shells in one file, offered once every crown sits on the scan. Choose the teeth below the preview: the designed teeth are checked to begin with, a tooth the patient keeps has no crown in any export, and with none checked Download asks you to choose one.
Download saves the design, then makes a zip of exactly what it saved: the files, the photo, the before and after (while the HD shows that design) and a notice. It downloads the zip and saves it to the patient's documents; one larger than 32 MB is downloaded only, and Smileline says so. Crowns on the scan are in the scan's frame, in true millimetres. Every export is still a visual reference: check it in your CAD software. Exports for fabrication aren't released yet.
Share with the patient
In the patient's designs, Share opens Share with the patient: Send to the patient app (in Italy, Share in the patient portal) shares the before and the HD after in the patient portal, which the patient app shows too: the after marked as a SmileDesign simulation, and the before as it is — or, for a design drawn on the retouched copy, that copy marked Photo retouched with AI. Send a link texts the patient a portal link, and Show QR in the room shows one to scan.
- After a colour-only change, Smileline first saves the HD in its new colour to Files as a SmileDesign simulation of the saved design, and shares that one, so the patient sees what you see.
- If the teeth changed since the HD, the dialog says the HD shows an earlier design before you share it; Update the HD to share the design as it is now.
- If your browser couldn't draw the HD in a new colour, the dialog says the HD is shared in its saved colour.
In the patient's History
The patient's record lists what happened to their designs in its History, under Changes, each with the SmileDesign sparkle, the design's name and Open design, which opens it among the patient's designs in Files. The same lines, for one design only, are on the right of Designs:
- Smile design created or Smile design duplicated, with who started it;
- HD result saved to Files, by Smileline, when the HD was saved;
- Video ready while a video waits for the browser of someone who files documents, then Video saved to Files, by that person (a video's line is its after clip's);
- HD result ready for an HD whose saving couldn't finish on Smileline's side, until someone saves it, then HD result saved to Files, by them;
- Shared with the patient, when an HD or a video saved to Files was shared in the patient portal, with who shared it.
The entries are read from the designs whenever the History opens, so they always match them: a result asked again with Retry shows once the new one is saved, and a design Smileline clears because it was never saved takes its entry with it. They belong to no journey, so with several journeys they show under All journeys. They show to the roles that can read the patient's documents, in practices that use SmileDesign, and each time they show, the activity log records a read of the patient's clinical record, as it does for Files.
From the lab's design
A design started From the lab's design shows the lab's wax-up or ortho setup on the patient's face, in two steps along the top.
- Files shows the photo and the places for four 3D files: Upper scan, Lab design, upper, Lower scan and Lab design, lower, each an STL, PLY or OBJ file filed on the patient. Click a place to choose its file or Upload a 3D file; click a filled one to replace it. The others wait for the upper scan. Point at the upper scan for Match the photo to the scan, which lines the photo up with it (as in Match the photo to the scan).
- On the face, once the upper scan, the lab's design and the match are in, draws the lab's design on the face through that match, in the scan's own frame — the one labs design in. Opacity and Warmth change it for your visit; the 3D files turn beside it, with Match again. The layers column sets each file's opacity (Hide the layers folds it away), and Add a 3D file adds the next one.
Not built yet
- the natural tooth library's 25 shapes in the tooth bar, until its licence allows them to ship;
- lining the photo up with the scan automatically, with a check before the manual match;
- a Blueprint project made from the design;
- the lab's 3D tools: per-layer colours and wireframe, cross-sections, the contacts map, annotations, lining scans up with each other, and what the lab changed;
- the video from Smileline's own GPU service (Wan 2.2), to compare with fal.ai's Wan 3.0, and the label written into the video there instead of in your browser;
- exports for fabrication (behind Smileline's release and the match's measured tolerance), and a printable model with a base;
- attaching an export to a lab order;
- a Shared with the patient entry in History for an HD shared after a colour-only change: the simulation saved for that share isn't tied to its design yet.
Opening files
What happens when you open a patient's file — PDFs, Word and Excel files, emails, DICOM x-rays, videos, archives, 3D files and the rest — and what to do when a preview isn't ready yet.
Implant planning
Open a patient's CBCT and intraoral scans in Implant planning straight from their record, and save the plan to it.