Smileline
Marketing

Manage your Google profile

Check your practice details against Google, approve the fixes, write posts, manage photos, connect Google and see how people find you.

Open SEO → Google profile, then choose a practice location.

The page needs a Google location linked to the practice location. Until one exists, a role that can manage SEO sees Connect Google, which opens the Google account panel; any other role sees a note to ask an owner or manager to connect Google.

Once a location is linked, the page has two columns:

  • Your practice details, checked against Google — your details as Smileline holds them, with a warning on each one Google's last check found different — then Google's numbers for the profile and What people did.
  • On the right, Posts (the next post due, the latest three, Write and All posts), Photos (your uploaded photos and Upload) and Setup.

Everything else opens in a side panel: Fixes for your profile, Create a post, All posts, Photos and Google account. Click New post at the top of the page to start a post; a role that can manage SEO also has Google account there.

Check your profile details

Your practice details, checked against Google shows the practice name and its Google category, then the address, phone, opening hours, website, services and description the profile audit compares with Google. These are Smileline's own details, from the practice location, the practice website and the active treatments — not Google's copy. A detail not set in Smileline reads Not set.

When the audit found Google's version different, the detail shows Different on Google (Name differs or Category differs beside the name). Each warning has a fix ready that you approve before anything goes to Google. A green tick means no fix is waiting for that detail. Before the profile has been checked at all, the card says so and shows no ticks.

Click Review 2 fixes (the number of open fixes) to open Fixes for your profile; with nothing open, the button reads Check with Google. Google's own value for a detail is read live from its fix, as described under Audit the profile.

See how people find you

If your role can read Social insights, the page shows the selected location's Calls, Directions, Website clicks and Views of the profile on Google Search and Maps over the last 90 days, each with its change against the 90 days before; a number whose history doesn't go back through those 90 days shows no change. Last 90 days at the top of the page says which period they cover. Below them, What people did charts calls, website clicks and direction requests week by week over the same 90 days. A week Google reported none of an action for leaves a gap and reads — when you hover over it, never 0.

The numbers come from the location's Google Business Profile account in Social. If the location hasn't been added there yet, the page says so: add it under Social → Accounts. A role that can't read Social insights sees a note in place of the numbers.

Finish the setup

Setup on the right lists:

  • Google account connected — with Connect for a role that can manage SEO until a Google location is linked;
  • Profile verified — ticked once Google has verified the location (verification happens on Google); and
  • Auto-post new treatments — Turn on switches on the safe catalogue autopilot described under Control safe catalogue autopilot.

Connect Google

Click Google account at the top of the page (or Connect under Setup), then Connect Google. An owner or manager signs in with the Google login that manages the practice's Business Profile. That login may be an agency's and see many other businesses too.

When you come back from Google, the Google account panel opens with a message saying whether the connection worked. Keep the page open while Smileline finds the locations the login can see. When it finishes, Link your Google locations opens for the person who connected Google: pick the Google location for each practice location, then click Save links. Only the locations you link are kept. Every other Google location the login can see is removed from Smileline, and later syncs read only the linked ones. If you close the dialog, click Choose locations to reopen it.

Only the person who connected Google can open Link your Google locations, because an agency's login also sees its other clients' locations. Everyone else sees who connected; to choose locations yourself, reconnect with your own Google login. A Google location can be linked to one practice at a time: one another practice already linked shows Connected to another practice and cannot be picked.

If your practice has many locations, scroll inside the dialog to reach each one. The title and Save links button stay visible.

To change the links later, click Reconnect Google and sign in again; the dialog reopens with your current links filled in, and you become the person who can choose. A disconnected practice keeps its links, so reconnecting restores them, and no other practice can link those locations meanwhile. Leaving a previously linked Google location unlinked deletes its stored reviews, posts and audit history from Smileline, unless a Social account posts to it: that location is kept, unlinked, and the Social account shows Reconnect needed until the location is linked again.

The page continues refreshing through slow responses and automatic retries while locations are found. Temporary Google failures retry in the background. A rejected request or an exhausted retry cycle needs attention: click Sync to try again, and contact support if the error persists. Support can check the affected Google API, HTTP status and recognised error reason without reading review content. Account discovery can succeed while Google's separate reviews API is unavailable. Reconnecting the same login does not resolve a Google API access or quota restriction.

A linked location is switched Enabled automatically once it is verified and Google has supplied a review link; switch it off to pause it. SEO posts, audits and review requests use enabled locations only. Social posts to every linked location Google has verified, whether or not it is enabled.

Google requires the connected account's express authorisation before Smileline can publish review replies. Switch Allow reply publishing on and confirm. Every reply still needs a team member to approve it. If push notifications cannot be configured without replacing another system's notification topic, Smileline leaves that configuration untouched and uses scheduled reconciliation instead.

Each Google account on the connection shows its instant review alerts: on, not set up yet, sent to another tool (new reviews then arrive with Smileline's regular check), or couldn't be set up (Smileline retries automatically).

Disconnect removes the practice's stored Google credential and reply permission, then finishes notification cleanup in the background. It also stops the Social accounts of the connection's locations until Google is connected again. Reconnecting may remain unavailable briefly while that cleanup completes. Google treats OAuth revocation as global to the Google user and Cloud project, so Smileline does not revoke the Google-side grant for a single practice. Remove Smileline from the Google account's connected apps only when you intend to affect every practice using that Google account.

Review content is retained only while it can be refreshed from Google, and Google reviews are never linked back to patients.

Audit the profile

Click Review 2 fixes (or Check with Google) on the profile card to open Fixes for your profile. Its top line says whether Google has verified the location, whether its sync is on and how the latest audit went; if an audit didn't finish, it says why and what to do next.

Click Check now to audit the profile again. The completed audit retains its status and prepares safe changes as local intent. Smileline does not retain the Google profile values, a completeness snapshot or discovery metrics.

Below it, every open fix and suggestion for the selected location is listed, highest impact first. Click Load more until the list ends.

Select a fix, then click Load live review. Smileline fetches Google at that moment and shows the exact Before and After values without retaining the response. If the live state no longer permits the fix, audit the profile again. A fix whose last attempt stopped, for example because the profile changed after the fix was suggested, says why under its summary.

Click Approve only after loading and checking the live review, or click Dismiss. Only a permitted approver can authorise a change. Applying an approved fix fetches Google again and merges the local intent in memory. If the state has drifted, Smileline reopens the fix instead of applying an unsafe change.

The profile page retains run and action status, timestamps, closed error codes and changes authored in Smileline. It does not provide stored Google profile history, field differences or discovery-metric history.

View all posts

Posts on the right shows when the next post is due — a scheduled post or a recurring series' next run — then that post and the newest ones, each marked Live once it is on Google, Scheduled, or with its draft status. Click All posts (it reads All 12 posts once Google's posts have loaded; a + means there are more) to open the full list in the All posts panel.

The list shows posts already on the linked Google profile alongside drafts and posts created in Smileline. Your Smileline drafts show straight away and Google's posts follow a moment later. The list reads Google when you open or refresh the page or pick another location, shows the current Google status, and displays a post only once when it also exists in Smileline. Changes made while the page is open do not read Google again, so refresh the page to see Google's latest status for a post you have just published.

Click Load more posts to reach older Google posts and additional Smileline drafts. Google content is read live rather than retained as imported drafts; use View to open a Google post. Edit, Publish and Delete apply to eligible Smileline drafts; Edit opens the post in Create a post.

If Google cannot be reached, Posts and the panel show an error and Retry while keeping your Smileline drafts available. A failed request for older posts leaves the loaded posts and Load more posts available to try again.

A post Google rejected, or one that failed to publish, says why under its text, with the next step. Edit it and publish it again.

Prepare and publish a post

Click New post at the top of the page, or Write on Posts. The Create a post panel opens with the cursor in Post text. Closing the panel keeps what you have typed until you save it or pick another location.

  1. Enter the post text.
  2. Choose the Post type: Update, Offer or Event.
  3. For an event, enter its Event title and when it Starts and Ends, in the selected location's timezone. Google needs the same for an offer: enter its Offer title and when it Starts and Ends, then add a Voucher code (optional), a Link to redeem the offer (optional) (it must start with https://) and Terms and conditions (optional).
  4. For an update or an event, under Button, choose what the post's button does: Book, Order online, Buy, Learn more, Sign up or Call now, then enter the Button link (it must start with https://). Call now needs no link: it calls the phone number on your Google listing. Choose None for no button. An offer has no button on Google; its redemption link takes that place.
  5. To publish later, choose Optional local publish time. The time uses the selected location's timezone and must be within the next 12 months.
  6. Under Photo (optional), pick an uploaded photo if the post should include one; pick it again to take it off.
  7. Click Save draft.
  8. Review the retained draft in All posts, then click Publish, or leave a scheduled post for the publishing queue.

A saved draft keeps its post type; to change it, create a new post. Publishing is a separate, explicit action. Failed provider work remains visible with its retained status rather than being presented as published.

Create an AI-assisted draft

In Create a post, add optional direction under Optional AI drafting direction, then click Draft with AI. Smileline uses the confirmed practice name, mapped location and active treatment catalogue as factual context. It does not use patient records.

The generated copy is retained as a draft and opens in the editor. Check every statement, make any changes, then click Update draft. AI-assisted copy can never publish automatically; click Publish only after you are satisfied with the final wording.

AI is instructed not to invent clinical outcomes, credentials, prices, promotions or patient stories. It still requires human review before publication.

Control safe catalogue autopilot

Under Safe catalog autopilot in the All posts panel, choose whether Smileline may schedule its fixed cautious template when a confirmed treatment-catalogue item first appears. This setting is off by default; Turn on beside Auto-post new treatments under Setup switches it on too.

The eligible template states only that the treatment is listed, contains no price or outcome claim, and directs readers to the practice for general information and an individual professional assessment. User-written and AI-assisted posts are never eligible for this catalogue autopilot.

Leave the setting off to receive each catalogue update under Fixes for your profile. Approve one to move it into editable drafts, or dismiss it.

Manage a recurring series

Under Recurring series in the All posts panel, enter the exact post text that may be published at each occurrence, then choose the post type, one-to-four-week cadence, weekday, local time and enabled state. Review the text before clicking Create series; it is publishable copy, not an AI drafting instruction.

Each due occurrence creates a separate scheduled post using that exact text. An event or offer occurrence takes the first 50 characters of the text as its title; an event lasts an hour, and an offer runs until the series' next post. Use Edit to change the text or cadence, Pause to stop future occurrences without deleting the series, or Delete to remove it. The next run remains visible on every series card.

Upload a photo

Click Upload on Photos (or in the Photos panel). Uploading needs a role that can manage SEO; a role that can only publish posts can still attach the photos already uploaded. Choose a JPEG or PNG between 10 KB and 5 MB, with both dimensions at least 250 pixels. Smileline verifies the image before making it available to a post, and picks a newly uploaded photo for the post you are writing.

Photos shows how many photos you have uploaded through Smileline and the first four; click them to open the Photos panel. Smileline doesn't keep the photos already on your Google profile, so they aren't shown here.

To remove a photo you no longer need, click its bin icon (Delete photo) in the Photos panel and confirm. Deleting needs a role that can manage SEO, and a photo used in a post can't be deleted until you take it out of the post.

On this page